3
Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343
US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
FEA
TURES, SAFETY PRECAUTIONS, P
ACKAGE CONTENTS AND SPECIFICA
TIONS
2. Features
3. Safety Precautions
WARNING
To reduce the risk of fire, electric shock
or product damage:
4
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
FEA
TU
R
E
S AN
D SAFETY PR
E
C
A
UTI
ON
S
MX0404-QI
• Quick and easy installation – set up in seconds straight out of
the box.
• Simplified ports - Input: HDMI – Output: integrated RJ45
connectors for a single Cat5e/6/7 UTP cable to each display
point for ease of installation.
• Conforms to IEEE-568B standards
• Each HDMI port also supports DVI signals.
• Each Output port can be fed to multiple displays (cascaded).
• Enables up to 4 HDMI video/audio devices to be independently
switched through up to 4 HDMI displays or projectors for
uncompressed digital distribution.
• Each output able to show any connected source simultaneously
regardless of whether the input carries HDCP encryption.
• Refined for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• 2k resolution supported.
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
interlaced stereoscopic 3D (satellite broadcasts etc.)
• Supports all high definition resolutions up to and including
1080p and standard video formats.
• RS232 port.
• Choose from 6 switching modes – infrared remote control, front
panel buttons, local IR, IR call-back, LAN and RS232.
• Simple switching remote control included, which can also be
learned into a universal remote handset to allow the control of
multiple devices from one handset.
• Fully compatible for integration with market leading control systems.
• 4 x IR 3.5mm mini-jack ports for each output to link IR from
control system to control display
• Additional infrared extension port for longer IR connections
• HDMI v.1.3
• Supports 24Bit Colour depth
• Signalling rate of 6.75 Gbps
• Pack comes complete with 1 x 4x4 Matrix with 19” rack
brackets, 4 x 40m IR receivers with mounting brackets, IR
receivers, emitters and a Matrix remote control handset.
Additional features included on the RX-1UTP-IR-40
• Transmits one-way signal together with the HDMI signal over a
single Cat5e/6/7 cable.
• Receivers capable of 1080p transmissions up to 40m (131ft)
under ideal conditions*
• For even greater control and fine tuning, each receiver features
a fully adjustable EQ distance range for optimising the
transmission signal.
2. Features
3. Safety Precautions
1. Do not expose this apparatus to rain, moisture, sprays,
drips or splashes and ensure that no objects containing
liquids are placed on the apparatus, including cups,
glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure the
unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard due to
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or
anything that may restrict airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and do
not place near sources of naked flame.
5. Unplug apparatus from power supply during lightening
storms or when unused for long periods of time.
6. Protect the power cable from being walked on, pinched
or restricted in any way, especially at plug connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all servicing to
qualified service personnel.
WARNING
To reduce the risk of fire, electric shock
or product damage:
• Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• 5v mains supply included but receivers may be powered through the
USB port of the display using Wyrestorm USB to 5v power adaptor)
• Fully cascadable to further lengthen transmission.
*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.
USB to 5V Cable
Part Number
CAB-USB-5V
• Full remote access, enables control and programming
from any compatible web enabled device including
smart phones, tablets, Smart TVs, PCs and Macs.
• Sleek, 1U design allows for installation flexibility in a
rack, cabinet or on a shelf.
• Instantaneous, intuitive control from a smart phone,
tablet, TV, PC or MAC browser.
• Advanced processor delivers exceptional performance
and control of connected devices including video,
audio, lighting etc.
• Extensive I/O to control devices through multiple IR,
RS232 serial, IP and Sensor I/O.
For further information,
wyrestorm.com
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no objects
containing liquids are placed on the apparatus,
including cups, glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure
the unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard
due to overheating, do not cover the unit or obstruct
ventilation openings with material, newspaper,
cardboard or anything that may restrict airflow into the
unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and
do not place near sources of naked flame.
5. Unplug apparatus from power supply during
lightening storms or when unused for long periods of
time.
6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all servicing
to qualified service personnel.
4. Package Contents
WyreStorm ENA-001-010 extender set comprising of:
1 x ENA-001-010 WyreStorm Enado controller
1 x Printed product manual*
8 x IR TX Y transmitter cable
8 x IR Link cable
1 x IR RX receiver cable
4 x RS232 male to female cable
2 x Mounting brackets
3 x 100-240v AC power cable: AUS, UK, US, EU
*Full manual also downloadable from product page at
wyrestorm.com
5. Specifications
Operating Temperature
32°F to 95°F (0°C to 35°C) 10% to
90%, non-condensing
Storage Temperature
-4°F to 140°F (-20°C to 70°C) 10%
to 90%, non-condensing
Dimensions (WxHxD)
440mm x 42.3mm x 261.6mm /
17.3” x 1.66” x 10.3”
Weight Approx
3.74Kg / 8.24Ibs (without acces-
sories)
Power Supply Input
100-240 V/AC
Power Consumption
≤11.8W (Pair)
IR Output Min/Max IR
Frequency
10K - 120K
USB Type
USB 2.0
Ethernet
10/100
Sensor I/O
Input requires 12V
