Wiring and Connections
WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its
entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.
IMPORTANT! HDMI Wiring Guidelines
• The use of patch panels, wall plates, cable extenders, kinks in cables, and electrical or environmental interference will have an adverse effect on HDMI
transmission limiting performance. Steps should be taken to minimize or remove these factors completely during installation for best results.
Installation and Operation
1. Connect an HDMI source to one end of the HDMI cable.
2. Connect an HDMI display device to the other end of the HDMI cable.
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that all HDMI connections are not loose and are functioning properly.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to other devices to verify functionality.
Copyright © 2019 WyreStorm Technologies |
EXP-HDMI-H2-xM Quickstart Guide | 191021
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
2 of 2
Specifications
Note:
WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice.
Audio and Video
Inputs
1x HDMI In: 19-pin type A
Outputs
1x HDMI Out: 19-pin type A
Output Video Encoding
Uncompressed
Encoding Data Rate
18Gbps
End to End Latency
Zero
Audio Formats
2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
Video Resolutions (Max)
1920x1080p @240Hz 8bit RGB
2560x1440p @120Hz 8bit RGB
4096x2160p @60Hz 10bit HDR 4:2:0
4096x2160p @60Hz 12bit HDR 4:2:2
4096x2160p @60Hz 10bit HDR 4:4:4
4096x2160p @60Hz 10bit RGB
Supported Standards
DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
600MHz
Communication and Control
HDMI
TMDS | HDCP 2.2 | EDID
Supported Features
Ethernet | Audio Return Channel (ARC) | CEC Auto Low Latency Mode (ALLM) | Variable Refresh Rate (VRR)
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing
Storage Temperature
-4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing
Maximum BTU
N/A
Dimensions and Weight
Cable Length
0.5m/1.6ft | 1.0m/3.2ft | 2.0m/6.4ft | 3.0m/9.6ft | 5.0m/16ft
Weight
0.05kg/0.11lbs | 0.09kg/0.19lbs | 0.14kg/0.30lbs | 0.22kg/0.48lbs | 0.35kg/0.77lbs
Regulatory
Safety and Emission
CE | FCC | RoHS
