background image

11

Mail-in-Service

Warranty

Warranty Limits and 

Exclusions

servicing personnel.

3. Replacement Parts:

 When parts need replacing, 

ensure parts approved by the manufacturer are used 
– either those specified by the manufacturer or parts 
possessing the same characteristics as the original parts. 
Be aware – unauthorised substitutes may result in fire, 
electric shock, or other hazards and will invalidate your 
warranty.

4. Safety Check:

 After repairs or service, ask the service 

personnel to perform safety checks to confirm the unit is 
in proper working condition.

When shipping the unit, carefully pack and send it 
prepaid, with adequate insurance and preferably in the 
original packaging. 

Please include a document or letter detailing the reason 
for return and include a daytime telephone number and/or 
email address where you can be contacted.

If repair is required during the limited warranty period, 
the purchaser will be required to provide a sales receipt 
or other proof of purchase, indicating date and location 
of purchase as well as the price paid for the product. 
The customer will be charged for the repair of any unit 
received unless such information is provided.

Should you feel your product does not function 
adequately due to defects in materials or workmanship, 
we (referred to as “the warrantor”) will, for the length of 
the period indicated below (starting from the original date 
of purchase) either:

a) Repair the product with new or refurbished parts.
or
b) Replace it with a new or refurbished product.

Limited warranty period:

All WyreStorm products are covered by a 3 year PARTS 
and LABOUR warranty. During this period there will be no 
charge for unit repair, replacement of unit components or 
replacement of product if necessary.

The decision to repair or replace will be made by the 
warrantor. The purchaser must mail-in the product during 
the warranty period. This limited warranty only covers the 
product purchased as new and is extended to the original 
purchaser only. It is non-transferable to subsequent 
owners, even during the warranty period.
A purchase receipt or other proof of original purchase 
date is required for the limited warranty service.

1. This Limited Warranty ONLY COVERS failures due 

to defects in materials or workmanship and DOES 

NOT COVER normal wear and tear or cosmetic 

damage.

The limited warranty also DOES NOT COVER damage 
that occurs in shipment or failures caused by products not 
supplied by the warrantor, failures resulting from accident, 
misuse, abuse, neglect, mishandling, misapplication, 
alteration, incorrect installation, set-up adjustment, 
implementation of/to consumer controls, improper 
maintenance, power line surge, lightening damage, 
modification, service by anyone other than
a manufacturer-approved service centre or factory-
authorised personnel, or damage attributable to acts of 
God.

2. There are no express warranties except as listed 

under “limited warranty coverage.” The warrantor 

is not liable for incidental or consequential damage 

resulting from the use of this product or arising out 

of any breach of this warranty.

 

For example: damages for lost time, the cost of having a 
person/persons remove or re-install previously installed 
equipment, travel to and from service location, loss of or 
damage to media, images, data or other recorded/stored 
content. The items listed here are not exclusive, but are 
for illustration only.

Parts and service not covered by this limited warranty 
are not the responsibility of the warrantor and should be 
considered the responsibility of the individual.

Summary of Contents for Express exp-EX-HDBT-50













Reviews: