Wytron Technolog
Wytron Technolog y Co.,
y Co., Ltd.
Ltd.
blank discs and the discs will remain blank as original after test. (DVD+R disc is not
blank discs and the discs will remain blank as original after test. (DVD+R disc is not
available under this function)
available under this function)
6.8 Update
6.8 Update
Functions on duplicator will be improved for
Functions on duplicator will be improved for better performance or for other
better performance or for other reasons.
reasons.
This function will update your firmware to the latest one or desired version. Switch to
This function will update your firmware to the latest one or desired version. Switch to
“Update” function first and then load the master disc containing the latest firmware
“Update” function first and then load the master disc containing the latest firmware
xxxxxxx.bin into CD/DVD-ROM drive and the duplicator will
xxxxxxx.bin into CD/DVD-ROM drive and the duplicator will find the data and
find the data and update its
update its
firmware automatically. During updating, don’t turn off the power of machine since the
firmware automatically. During updating, don’t turn off the power of machine since the
update will not be finished till machine tells you to restart
update will not be finished till machine tells you to restart the machine such as “Please
the machine such as “Please
restart”. (Turning off machine during
restart”. (Turning off machine during updating might cause severe result such as
updating might cause severe result such as no
no
booting, etc. Also, it is suggested to wait for 10 seconds even the LCD display is
booting, etc. Also, it is suggested to wait for 10 seconds even the LCD display is
showing you to restart the
showing you to restart the power.
power.))
Procedures to make the BIOS disc by yourself:
Procedures to make the BIOS disc by yourself:
1.
1. Get the BIOS firmware from Wytron through e-mail (wytron@w
Get the BIOS firmware from Wytron through e-mail (wytron@wytron.com.tw). Be
ytron.com.tw). Be
careful not to use the wrong firmware, as it
careful not to use the wrong firmware, as it will cause duplicator to hang up and not to
will cause duplicator to hang up and not to
function correctly.
function correctly.
2.
2. Unzip the BIOS firmware and write the file
Unzip the BIOS firmware and write the file
“cdxxxx.bin”
“cdxxxx.bin”
or “
or “
dvdxxxx.bin
dvdxxxx.bin
” into the
” into the
root directory on a blank CD/DVD disc. Session of the CD/DVD has to be closed. If
root directory on a blank CD/DVD disc. Session of the CD/DVD has to be closed. If
the same disc still has capacity to add data, it can be used to store newer version of
the same disc still has capacity to add data, it can be used to store newer version of
BIOS program. When updating BIOS program from the data disc, only the one in last
BIOS program. When updating BIOS program from the data disc, only the one in last
session will be used. Other
session will be used. Other versions in previous sessions will be ignored.
versions in previous sessions will be ignored.
3.
3. Be noted that different writers might need different version o
Be noted that different writers might need different version on controller card to work
n controller card to work
properly. Users should be aware that using the proper version according to the
properly. Users should be aware that using the proper version according to the writers
writers
installed on duplicator is more important than using the latest version.
installed on duplicator is more important than using the latest version.
6.9 Reset
6.9 Reset
The reset procedure is required for
The reset procedure is required for several reasons such as: First assembling of
several reasons such as: First assembling of
duplicator, changing new brand of writers in old duplicator, wrong setting for certain
duplicator, changing new brand of writers in old duplicator, wrong setting for certain
function or bring back the factory’s default setting according to different usages. Our
function or bring back the factory’s default setting according to different usages. Our
design provides an easy way for customer to reset their controller cards as below:
design provides an easy way for customer to reset their controller cards as below:
1.
1. T
Turn off the power of duplicator and wait for 10 seconds. If the duplicator is not
urn off the power of duplicator and wait for 10 seconds. If the duplicator is not used
used
at this moment, ignore this step and go to procedure 2 directly.
at this moment, ignore this step and go to procedure 2 directly.
2.
2. Press and hold down the MODE switch and turn on the power of duplicator
Press and hold down the MODE switch and turn on the power of duplicator
simultaneously (the MODE switch must be held
simultaneously (the MODE switch must be held down at least 5
down at least 5 seconds while turning
seconds while turning
on the power of duplicator).
on the power of duplicator).
3.
3. Release the MODE switch after the message of “clear setup” is shown on the top line
Release the MODE switch after the message of “clear setup” is shown on the top line
of LCD display.
of LCD display.
4.
4. If the “clear setup” message is not shown, please repeat the whole procedure above
If the “clear setup” message is not shown, please repeat the whole procedure above
but remain the finger on MODE switch all the time during power on
but remain the finger on MODE switch all the time during power on till you see the
till you see the
message of “clear setup” on
message of “clear setup” on LCD display.
LCD display.
5.
5. All setting on duplicator will be restored to its factory defau
All setting on duplicator will be restored to its factory default setting after the “clear
lt setting after the “clear
setup” message shown on the LCD display. (
setup” message shown on the LCD display. (Unlike the Update procedure which will
Unlike the Update procedure which will
keep the settings the same before
keep the settings the same before BIOS Update.)
BIOS Update.)
Page 27 of 33
Page 27 of 33
