Wytron Technolog
Wytron Technolog y Co.,
y Co., Ltd.
Ltd.
4.
4. Operati
Operation
on
1.
1.
Power
Power on
on the s
the system
ystem and
and you
you will se
will see a
e a self-testing
self-testing procedure
procedure running.
running. The
The following
following
display will appear:
display will appear:
DVD-688
DVD-688 V3.56
V3.56
2008
2008
WYTRON TECHNOLOGY
WYTRON TECHNOLOGY
detect drives ……
detect drives ……
Copy
AA4234M
Copy
AA4234M
<mode
<mode
AG234M14:23
AG234M14:23
Length of Master contained in hard drive. It varies from masters or
Length of Master contained in hard drive. It varies from masters or
may not exist if there is no data stored. No messages will be displayed on top-right
may not exist if there is no data stored. No messages will be displayed on top-right
corner if hard drive is not installed.
corner if hard drive is not installed.
AA
AA
Partition G in A group of hard drive
Partition G in A group of hard drive
4234M
4234M
Capacity at AG partition in MB
Capacity at AG partition in MB
14:23
14:23
Capacity at AG partition in minute
Capacity at AG partition in minute
2.
2.
Different
Different devices
devices installed
installed in
in duplicator
duplicator will
will require
require different
different operation
operation procedures
procedures
including two main categories:
including two main categories:
AA
AA . Wi
. With
th har
har d d
d d rriv
iv e in
e in st
st all
all ed
ed
a.
a. Duplicator will au
Duplicator will automatically detect
tomatically detect the hard d
the hard drive and cre
rive and create partitions
ate partitions for it (each
for it (each
partition will have 850MB capacity for CD
partition will have 850MB capacity for CD duplicator
duplicator, e.g. 40
, e.g. 40 GB Hard Disk will
GB Hard Disk will
probably have 44 partitions. For DVD duplicator, 4.8GB or 9.6GB for
probably have 44 partitions. For DVD duplicator, 4.8GB or 9.6GB for each partition.)
each partition.)
b.
b. Yo
You can select p
u can select partition in the “hdd p
artition in the “hdd partition group” function in
artition group” function in Setup Menu.
Setup Menu.
c.
c. If there is no dat
If there is no data stored in presen
a stored in present / selected p
t / selected partition of hard drive, pres
artition of hard drive, press the MODE
s the MODE
switch to select “Load” function and place the master disc into the CD/DVD-ROM
switch to select “Load” function and place the master disc into the CD/DVD-ROM
drive which will automatically detect t
drive which will automatically detect the master, analyze and load data into the
he master, analyze and load data into the
present / selected partition. The master disc will be ejected
present / selected partition. The master disc will be ejected when loading is completed.
when loading is completed.
In case of error, the LCD will show “error” and the master disc will also be ejected
In case of error, the LCD will show “error” and the master disc will also be ejected
automatically
automatically. Change another master disc
. Change another master disc for loading. Master data can be
for loading. Master data can be stored in
stored in
different partition, switch to that
different partition, switch to that particular partition (Please refer to hdd
particular partition (Please refer to hdd partition group)
partition group)
for loading.
for loading.
d.
d. Switch to Copy b
Switch to Copy by pressing MODE
y pressing MODE switch. Place bla
switch. Place blank CD/DVD discs
nk CD/DVD discs into all the
into all the
writers. Duplicator will start copying when all writers detect the discs. If you do not
writers. Duplicator will start copying when all writers detect the discs. If you do not
need to use all writers for copying, the LCD display will display the number of CD disc
need to use all writers for copying, the LCD display will display the number of CD disc
detected as “ Xstart” (X represents the number of writers with detected discs that are
detected as “ Xstart” (X represents the number of writers with detected discs that are
Page 9 of 33
Page 9 of 33
