LASER DIFFUSER
7
Install the Unit
The XR-9500 needs professional installation recommended. New car dealers and the
group of car audio specialists can install the XR-9500. Attempting to install the XR-
9500 without expertise in automotive electronic can cause personal injury during the
installation, or can damage the product or your vehicle.
Sensor Installation
• It can be mounted between the front grill partitions or above the rear bumper.
• Using the 3M double sided tape to mount the sensor. Otherwise using the bracket,
bolts and wrench to mount the sensor and adjust the sensor position which is
levelled. It is very important to install with parallel to receive the signals.
• Use supplied bubble level to check alignment of the sensor and ensure it is
parallel to the road.
• It is critical that they should be positioned in such a way that all the sensors have
unobstructed “view” of the road.
☞
In case of installation sensors behind the front grill of the vehicle, the parking
assistant mode might not working properly. Because the front grill can reflect the
signal, sensors recognize it as obstacles. When you finish the installation, check if
it makes a constant alarm at parking sensor mode. It is recommended to install
the edge of the grill where it is unobstructed ‘view’.
1
2
↓
3M double sided tape
ALARM/ MODE
INDICATION LIGHT
DC 12V POWER CORD
INPUT JACK
1
2
3
4
↓
↓
↓
BRACKET MOUNTING
DOUBLE SIDED TAPE MOUNTING
