X-Driven DRS1100 Installation And Operation Manual Download

Page: 13 / 15

Warnings

Please read the following carefully to use the product properly and protect the

user’s safety.

1. Do not disassemble, repair, or alter the product. When malfunctions, errors, or other
accidents are found to be attributable to a user, a user may not be eligible for after/sale
service.
2. When cleaning the inside of a vehicle, do not spray water directly on to the product. It
may cause damage to the product, fire or electric shock.
3. Keep away from chemicals or detergents as they may change the surface of the prod-
uct or spoil the interior of the device.
4. Avoid excessive impact and do not insert any foreign objects into the device. Severe im-
pact or shock or other foreign matters including soda may cause damage to the product.
5. When a foreign matter or sticker blocks the lens, a normal operation is impossible so
always clean the lens before use. Also, when other objects are placed around the camera,
they may be reflected on the window and included in the image, so please do not leave
unnecessary objects around the device.
6. Even though the product operates normally when it is first installed, it may not con-
tinue to do so as its position changes. Make sure the product is installed tightly and do not
expose the device to excessive shock or move the device after installation.
7. When a vehicle is parked in an underground parking lot for a long time or when a
vehicle is exposed to severe vibrations on an unpaved road, malfunctions may occur as
the position of the device changes. If the device is positioned differently from the initial
setting after traveling on an even road, correct its position.
8. Staring at or operating the product whilst driving is dangerous and may cause an accident.
9. Keep the product away from excessive impact, humidity, or salt. Pressure or shock after
installing the product may change the position of a device and cause malfunction.
10. This product is a device using a camera. Thus, in extreme cases like when a vehicle en-
ters or exits a tunnel with a sudden change of light, when the light is too strong e.g during
the day, or when there is no source of light e.g at night; images are recorded poorly.
11. Be aware that the data of an accident under a certain impact of acceleration may
not be recorded in this product. In this case, it is possible to record images manually with
Emergency Button.
12. In the case of vehicles with excessively tinted windshields, images recorded by this
product may be poorly defined or distorted.
13. Only use the enclosed cable to connect the product to the power source, and only
as directed in the manual. This product should be connected only to the power inside a
vehicle. When using a cable other than the one provided or connecting the cable to other
power sources, it may cause malfunction or fire.
14. When power is turned off due to a big accident, image data may not be recorded.
15. For smooth GPS reception, make sure to keep GPS receiver horizontal when installing
the product and do not put any objects such as electronic products that could interfere
the reception.