Support
Should you encounter difficulty with the installation or programming, please
consult the Help Files in X-keys Android. We also recommend checking the
FAQ page on our website before contacting our technical support specialists.
USA:
tech@xkeys.com
| Phone: 1-517-655-5523
UK:
xkeys@keyboardspecialists.co.uk
| Tel +44 (0)20 3474 0234
Compatibility
X-keys Android units can be programmed to emulate a USB keyboard, mouse,
game controller, or multimedia controller. Programming is stored in X-keys on-
board memory and the X-keys will send USB messages to any computer or
tablet (no software or driver installation required).
Identifying the Keys
Select appropriate icons or use the blank legend sheet to create your own key
legends. The keycaps snap off with a fingernail or small screwdriver. Apply
the label under the keycap, and replace it. The key caps hold a legend 0.575"
wide and 0.5" high (14.6mm x 12.7mm). Other options are available for
printing legends for multiple units. See more information on our website.
Large Keys
The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller. Press
the double-key in place over the two exposed switch stems. Large quad (2x2)
keycaps are also available.
NOTE:
When programming for a quad key, always select one of the keys
under the lower half of the keycap. When programming for double keys,
choose either of the two keys covered by the keycap. Programming both will
result in both macros firing simultaneously.
Backlighting
All keys on the XK-24 have two backlighting colors (red and blue). Backlighting
color and intensity can be set and keys can be programmed to manipulate the
backlighting. See more information in the Help File.
Feet
The included angled feet may be snapped in to the bottom of the XK-24 to
give it a slight tilt in either portrait or landscape orientation.
