13
Read these instructions carefully before use and keep them for future
reference. Your child's safety may be affected if you do not follow these
instructions. The stroller is designed to transport one child who can sit up
unassisted (over 6 months). Maximum weight of the child: 15 kg.
Do not use the stroller as a pushchair, until your child is able to sit unassisted
and is not younger than 6 months.
ATTENTION:
Do not use any additional accessories which are not listed
by the manufacturer.
The X-Q chassis is compatible with X-Q stroller seat, X-pram Q bassinet
and X-car safety seat, which can be mounted on the chassis by means of
additional X-car Q adapters.
WARNING
: It may be dangerous to leave your child unattended.
WARNING
: Use harness as soon as your child can sit unaided.
WARNING
: Before using the pram/stroller, check if the bassinet or seat unit
has been safety fitted on the chassis.
WARNING
: Always use the crotch strap in combination with the waist belt.
WARNING
: Check that folding devices are correctly engaged and blocked.
WARNING
: Any load attached to the handle affects the stability of the
pushchair. Loading of pocket shouldn't pass limit of 1 kg. and loading of
shopping basket shouldn't pass limit of 3 kg.
WARNING:
Maximum load of two carrycot pockets cannot exceed 0 .5 kg.
WARNING
: This product is not suitable for running or skating.
WARNING
: Do not use a mattress thicker than 32 mm.
Keep plastic packaging materials out of reach of children to avoid the danger
of asphyxiation. When parking always use the parking brake. Avoid situations
of extreme use that decrease your control over the child and the stroller.
When using the stroller for your child, your speed should be limited to a walk-
ing speed. Running, jogging or skating are not recommended. Do not use
escalators or stairs and be careful when using the elevators while your child
is in the stroller. The stroller may only be used for the transportation of one
child. Use only original accessories and original spare parts.
Make sure that the child's hands stay out of range of possible pinching areas
when the stroller or parts thereof are being folded, unfolded, or otherwise
changed.
WARNING
: When storing the stroller in a car trunk pay special attention not
to exert a pressure on it by the trunk lid, as this can result in the damage of
the stroller.
WARNING
: Bear in mind that small parts, such as the caps protecting axles
in transport, can be swallowed by your child, and may cause your child to
choke.
MAINTENANCE
To prolong the life span of your stroller, dry with a soft cloth after use in rainy
weather. Clean the wheels and the metal parts regularly to keep the stroller
functioning smoothly. Use mild detergents and lukewarm water for cleaning.
Do not use aggressive solvents. TThe seat and the shopping basket should
not be washed in the washing machine. For safety reason use original parts
only.
E
N
G
L
IS
H
12
14. ASSEMBLY AND DISASSEMBLY OF REAR WHEELS
To assembly or disassembly the wheel, push button, which is in the middle o f
the wheel.
15. MOUNTING OF THE FRONT WHEEL
In order to mount the wheel, slide it onto the axle until the lock is engaged.
16. DISMOUNTING OF FRONT WHEEL
In order to take the wheel off, push the button shown on the figure , and
pu ll
the wheel off the axis.
17
. BACKREST ADJUSTMENT
Pick up the tie and put up the backrest in required position.
18. ADJUSTING THE HANDLE HEIGHT
Push in the both buttons located on articulated joints of the handle and change
its location.
19. ADJUSTING THE LENGTH OF THE HANDLE
Pull the links of the locks and change length of the handle by sliding it out or in.
20. MOUNTING OF CARRYCOT
In order to mount the carrycot on the frame, slide its catches into mounting
seats until locks are engaged.
21. DISMOUNTING OF CARRYCOT
To take the carrycot off, push in the buttons unlocking the catches (a) and pull
it out from mounting seats (b).
22. MOUNTING THE CAR SEAT
Special adapters are needed in order to mount the baby car seat. Place the
adapters in mounting seats of the frame and attach the car seat by catching it
on the adapters.
Attention:
Ensure proper fitting of the armchair before using it.
23. REMOVING THE CAR SEAT
In order to take the car seat off, push in the unlocking pushbuttons on both its
sides, while simultaneously pulling it out of mounting seats. Remove adapters
by pushing in the unlocking pushbutton.
WARNINGS AND POINT OF ATTENTION
Based on effectuated tests, Deltim declares that the delivered stroller
complies with all requirements of PN-EN1888/2003 + A1/A2/A3:2005 norm.
24. INFLATING WHEELS
To inflate a wheel, unscrew the valve's cotter. Place the pump on the valve
and inflate the wheel. The maximum allowed wheel pressure is 1.5 bar.
25.
PLACING AN ADDITIONAL SEAT PAD
Unfasten the straps buckle (a). Place the seat pad on the stroller's seat and
move the seatbelts through the openings as shown in (b, c). Add the shoulder
pads on the shoulder belts as shown in (d).
E
N
G
L
IS
H
Summary of Contents for Around the World XQ
