Welcome to X-Laser
Thank you for purchasing an X-Laser
®
product! All X-Laser
®
products
undergo a twenty-six point inspection during construction. Before
shipping, each laser is subjected to a second twenty-six point inspection
to ensure that your lasers will leave us in perfect working order.
All of the functions of your new laser including the DMX protocols have
been checked to ensure excellent and safe performance. If you find any
defects in one of our products or see a broken factory seal on the unit
itself, please contact X-Laser
®
immediately for warranty service.
Your new X-Laser
®
is capable of producing absolutely stunning aerial
laser effects over audiences in nearly any performance application with
the convenience and flexibility of full DMX control. With the power of X-
Laser
®
fixtures also comes a responsibility for safety so we strongly en-
courage you to read and follow all of the notices throughout this manual.
If you have any questions about proper use of these laser systems, laser
safety, troubleshooting, or anything else, visit us on our web site 24/7 at
www.x-laser.com so that we can best assist you.
We want you to have a wonderful experience with our products so that
you can bring the thrill of professional laser light shows to your audi-
ences. The common sense safety procedures outlined in this manual
should be easy to successfully implement in your shows and provide you
with years of safe and profitable laser displays. Please contact us or your
X-Laser
®
dealer if you have any questions about how to safely and effec-
tively use our products.
Warranty and Service
Register Your Product
You must first register your X-Laser
®
product to activate your warranty.
Failure to do so may result in loss of warranty or cause warranty service
to take longer than expected. To register your product visit the X-Laser
®
site and click on the Support menu option and choose the Warranty Reg-
istration link.
Warranty and Service Policy
X-Laser
®
warrants that this product will be free from defects of materials
or workmanship for 12 months for the mechanical components of the
Page 3 of 18
®
