Power on/off :
Please check before use: The battery is enough, or it is connected to external power
source.
Power on
Press the power button on the top of the X-Map to turn on the navigation system.
【
Note
】
If bring the unit form one place to another place, please boot until it adapts to the
environment. Big humidity fluctuation can/will make the mainframe short-circuited.
2.2 Power off
Press the button on the top of the X-Map to turn off, the navigation system will enter the
power saving mode and maintain the last operation status when power on next time.
Reset system :
If the system doesn’t work, you can reset the system by the following way:
1. Click the reset key on the right part of the machine to reset the system by using a stylus.
【
Relative information
】
It can be possible there is no response in the following condition:
- The shift between pictures is delayed or stopped.
- The select program function cannot work normally, such as long time to load or
cannot be activated at all.
- The power button doesn’t not work.
【
Note
】
The unsaved data will be lost as you reset the system when the system
has no response. Please make a backup copy of the data after you made the first
use of your X-Map 4000 or 5000 and keep your personal backup updated.
