X-Micro WLAN 11b Broadband Router, User Manual

USER’S MANUAL OF X-Micro WLAN 11b ACCESS POINT 

Version: 2.0 

3

Software configuration 

There are web based management and configuration functions allowing you to have the jobs 

done easily. 

X-Micro WLAN 11b Access Point is delivered with the following factory default parameters. 

Default IP Address

: 

192.168.1.254

Default IP subnet mask

: 

255.255.255.0

WEB login User Name

: 

<empty>

WEB login Password

: 

<empty>

3.1

Prepare your PC to configure X-Micro WLAN 11b Access Point 

For OS of Microsoft Windows 95/ 98/ Me:   

1.

Click the 

Start

 button and select 

Settings

, then click 

Control Panel

. The 

Control 

Panel

 window will appear.   

Note:

 Windows Me users may not see the Network control panel. If so, 

select

View 

all Control Panel options

 on the left side of the window 

2.

Move mouse and double-click the right button on 

Network

 icon. The 

Network

window will appear. 

3.

Check the installed list of 

Network Components

. If TCP/IP is not installed, click the 

Add

 button to install it; otherwise go to step 6. 

4.

Select 

Protocol

 in the 

Network Component Type

 dialog box and click 

Add

 button. 

5.

Select 

TCP/IP

 in 

Micro oft

 of 

Select Network Protocol

 dialog box then click OK 

button to install the TCP/IP protocol, it may need the Microsoft Windows CD to 

complete the installation. Close and go back to 

Network

 dialog box after the TCP/IP 

installation. 

s

6.

Select 

TCP/IP

 and click the 

properties

 button on the 

Network

 dialog box. 

7.

Select 

Specify an IP address

 and type in values as following example. 

9

IP Address: 

192.168.1.1

, any IP address within 192.168.1.1 to 192.168.1.253 is 

good to connect the Wireless LAN Access Point. 

9

IP Subnet Mask: 

255.255.255.0

8.

Click OK and reboot your PC after completes the IP parameters setting.   

For OS of Microsoft Windows 2000, XP:   

1.

Click the 

Start

 button and select 

Settings

, then click 

Control Panel

. The 

Control 

Panel

 window will appear. 

2.

Move mouse and double-click the right button on 

Network and Dial-up 

5