background image

Copyright © Vertical Leisure LTD 2014   |  All rights reserved.  

Version: 1.01

3

CRITICAL INFORMATION - PLEASE READ

THIS BEFORE OPENING YOUR PACKAGE

To get the best from you’re A-FRAME – with SAFETY being the utmost priority – it is extremely 

important that you READ & FOLLOW the Instruction Manual from beginning to end and most 

importantly, understand it!

Follow the simple but explicit instructions in this manual to get the best results from your A-FRAME.

Safety is a priority at all times.

If you have ANY questions – before you assemble, install or use your A-FRAME – contact your point of 

purchase or see the A-FRAME section on the website (www.xpole.com – first select your region, then 

search for the A-FRAME).

VERTICAL LEISURE LTD, X-POLE INTERNATIONAL, X-POLE US INC, THEIR DISTRIBUTORS, SALES 

PERSONS OR ANY OTHER PERSONS OR ASSOCIATED COMPANIES CANNOT BE HELD 

RESPONSIBLE FOR ANY DAMAGE TO PROPERTY OR INJURY TO PERSONS OR THIRD PARTIES 

DURING THE USE OF THIS PRODUCT.

BY REMOVING THE A-FRAME FROM ITS PACKAGING AND/OR ANY USE OF THE PRODUCT 

CONFIRMS ACCEPTANCE OF THE ABOVE WARNINGS AND THE USER’S RESPONSIBILITY IN USING 

THE PRODUCT.

IF YOU DO NOT ACCEPT THE TERMS SET OUT ABOVE THEN:

DO NOT 

REMOVE THE A-FRAME FROM ITS PACKAGING OR ATTEMPT TO ASSEMBLE, INSTALL OR 

USE THE PRODUCT.

Contact your point of purchase to arrange a return & refund (shipping costs may still apply).

The product must be returned unused & in its fully packaged state.

CAUTION: Take note that carpet, wooden or sprung floors can affect the stability of this product.

CAUTION: Never undo any of the screws unless you are explicitly told to do so in the instruction 

manual.

Summary of Contents for A-FRAME









Reviews: