5
®
LEADERS IN POLE & AERIAL FITNESS
Copyright© Vertical Leisure Ltd. 2018 Version 1.0
All rights reserved.
Inserting LyraPole
‘A’ Pole
LyraPole
Retaining Stud
Weight Plate
Sandbag
Align the X-JOINT on the
bottom of your LyraPole
with the hole in the XSTAGE
A-POLE, so that the hex screw
can be accessed.
Insert the LyraPole to the
A-POLE and check for a snug
fit using the keyway slots on
the X-JOINT and the
corresponding slots on the
inside of the A-POLE.
Using a 6mm hex key, tighten
the X-JOINT until the LyraPole
is securely attached to the
X-STAGE A-POLE. check by
lifting the hoop with sufficent
pressure.
Remove one of the stage
plates and locate the weight
tray retaining caps on either
frame Leg – completely
unscrew the retaining caps
and remove.
Place the weight plate over the
exposed retaining screws and
replace the retaining cap.
Add the desired extra weight
(10kg-30kg per section).
Sandbags are available from
your X-POLE dealer or
standard gym weights are
suitable too.
Replace stage plates, ensuring
you have the spring pins under
the plate unlocked, slide the
stage plate under the central
plate of the stage and
continue until all plates are
back in place. Ensure spring
pins are in locked position.
45mm
Xstage Pole
34mm Hoop tube
Fig. (3.2)
‘A’ Pole
X-Joint
Aligned
Key & U slot
LyraPole
Fig. (3.1)
Fig. (3.3)
Fig. (4.1)
Fig. (4.2)
Fig. (4.3)
®
®
®
®
®
Additional stage weights (Highly Recommended)
CLOCKWISE
to TIGHTEN
Gym Weight
