18
®
LEADERS IN POLE & AERIAL FITNESS
Copyright© Vertical Leisure Ltd. 2020 Version 3.0
All rights reserved.
It is important to check that the X-Joint is
firmly tightened before every use and check the
X-joint every half-an-hour. It is also advisable to
check that the Pole Retaining Screws and
Bearing Retaining Screws are fastened securely
prior to every use.
Pole maintenance
Fig. (17.1)
WARNINGS
DO NOT -
lift or carry the X-STAGE by the plates. This will damage the spring catch pins.
DO NOT -
drag/slide the X-STAGE. This will damage the rubber feet.
DO NOT -
remove/loosen the m8 pole retaining screws when dismantling the pole.
DO NOT -
try and remove the pole when in spinning mode - damage will occur.
DO NOT -
use the X-STAGE without additional weights during competitions or performances.
DO NOT -
store your stage in a cold/damp place.
Fig. (18.1)
X-Clean & Micro-Fibre Cloths
X-POLE strongly recommends the use of X-CLEAN with our
specially designed Micro-Fibre Cloths to clean and maintain the
surface of your XPERT Pro Pole. You can purchase these items from
our website WWW.XPOLE.COM (first select region, then search
for X-CLEAN) or your point of purchase.
DO NOT USE X-Clean on Brass, Powder Coated or Silicone Poles.
Cleaning your pole
