background image

Rev.081022 

Page 3 of 22 

FUS-20852000-0031 

 

Table of Contents 

Symbols Index ....................................................................................................................................... 3 
Important Safety Information ............................................................................................................... 4 
Specific Operation Warnings ............................................................................................................... 4

 

Intended Use .......................................................................................................................................... 6 
Winch Overview & Terms ..................................................................................................................... 6

 

Installation Instructions ........................................................................................................................ 6

 

Before Each Use .................................................................................................................................. 13

 

Operating Instructions ........................................................................................................................ 13

 

After Each Use ..................................................................................................................................... 16

 

Maintenance ........................................................................................................................................ 16

 

Troubleshooting .................................................................................................................................. 17

 

Replacement Parts .............................................................................................................................. 17

 

Parts Diagram ...................................................................................................................................... 18

 

Parts List .............................................................................................................................................. 18 
Warranty  Information……………………………..…………………………………………………….…..19 

 
 

Symbols Index 

 

 

Read All Product 
Literature 

 

Always use supplier 
Hook Strap 

 

Never Use Winch as a 
Hoist 

 

Fairlead Pinch Point 

 

Do not use to transport 
people or animals. 

 

Never hook back on 
Rope 

 

Wind Rope from Bottom 
of Drum 

 

Never Apply Load to 
Hook Tip 

 
 

Finger Crushing Hazard

 

Avoid Pinch and 
Wear/Abrasion Points 
on Electrical Cable 

 

Properly Seat Load in 
Throat of Hook 

 

Never Route electrical 
cable over sharp edges 

 
 
 
 
 
 
 

 

Summary of Contents for XP40























Reviews: