Rev.081022
Page 7 of 22
FUS-20852000-0031
Winch Overview & Terms
Become familiar with your winch before you begin installation and operation. See the illustrations below
with common winch terms.
Installation Instructions
⚠
WARNING
Read the entire Important Safety Information section at the beginning of this manual, including all
text under subheadings, before setting up or using this electric winch.
Mounting the Winch:
1.
The mounting plate must be rated to at least the winch’s capacity. It must be flat and strong enough
to remain flat at maximum winch capacity. The winch must sit flat on winch mount with no gaps
under drum supports. It must have the hole pattern shown below.
Align the winch perpendicular to centerline of the vehicle at the desired location and mark the
locations of the winch base holes. Compare the dimensions of the marked holes.
MOTOR
DRUM
CLUTCH DIAL
ROPE
POWER
CABLES
CONTACTOR
CORDED
REMOTE