G E T T I N G S T A R T E D
1-3
APPLYING POWER
To apply power to the instrument:
1.
Verify that the voltage indicated on the adapter complies with the AC
line voltage in your area. If not, contact X-Rite or your authorized
representative.
2.
Insert the small plug from the adapter into the power-input connector on
the instrument.
3.
Plug the detachable line cord into the adapter.
4.
Plug the line cord into an AC wall receptacle.
IMPORTANT:
To extend the life of the internal memory battery, it is
recommended that the instrument remain plugged into AC power. If you are
using a modem, AC power must be applied in order to transmit or receive data.
At initial power-up, the instrument performs a “boot memory test.” The
testing sequence is displayed on the instrument screen. If all internal tests are
OK, Page 1 Channel Menu displays—see next page.
Power Input
Detachable Line Cord
Testing Program
boot memory...3
XRite 891 vXXXX
Copyrt 1989—1997
2
1
Adapter
Summary of Contents for 891
