X-Rite DensiEye 100 and 700
DensiEye Reference Manual 4
15
3.2.2. Density
(Absolute)
•
Set White Base to Absolute or Absolute Auto in the Function Settings
•
Make sure the instrument is calibrated for absolute white
base
•
Set reference values in the References menu
•
Select Density in the main menu
o
The status displays the current reference set if the Pass/Fail detection is activated
or Absolute/Difference is set to Difference
o
The status displays the current filter/color
•
Select
Filter
•
The pop-up window shows a list with automatic or manual filter/color selections
•
Set the automatic or manual filter/color selection
o
The status displays the current filter/color
•
Select
Absolute/Difference
•
Select Absolute for absolute density values
o
The output area displays D
•
Select Difference for difference density values
o
The output area displays
∆
D
•
Select Reference for difference readings
•
The pop-up window shows a list with reference sets
•
Select a reference set
o
The status area displays the selected reference set
•
Measure
Solid
•
The output area shows absolute or difference density values and the corresponding
color of the last patch
•
Select Return to return to the main menu
