Set Up a Smoke Alarm
Once you add the smoke alarm to the system, you will need to set it up within the app by naming
the device, selecting the room in which it is installed, and enabling notifications from the app.
Device Self-Check
Tap
Self-Check
in the app so the device performs a self-test of its electronics and circuits. The
device will beep three times and the LED indicator will flash red, then it will return to standby
mode.
Push Notifications
Enable push notifications from the app to receive alerts of any changes to the system. It is
recommended that you limit your notifications to specific ones that you would like to receive, so
you won’t get too many of them and it becomes bothersome.
Note:
Offline Notification
If the alarm becomes disconnected from the base station, you will see “Offline” on the app’s
device list and receive a push notification. Note that the offline notification may not be sent
instantly, as the alarm reports to the base station at set intervals.
Record History
To access data or check device status, tap
History
on the bottom of the app.
