12.
Copyright ©WESSOL, LLC
STEP 1.
ASSEMBLING YOUR SPRAYER
A).
Before you begin, locate the 40-micron misting nozzle
(9), 120-micron misting nozzle (11) and nozzle wrench
(8), can be found in the gun box, and set aside.
*The 80-micron misting nozzle (10) is pre-installed in the gun
B).
Connect the electrostatic hose (5) to the gun (1)
by lining up the numbered pegs (1, 2, and 3) to the
corresponding female inputs (1, 2, and 3) on the gun.
Insert, then secure fitting by tightening the blue
external cap.
C).
Take the electrostatic gun (1) and attach it to the
threaded fitting on the end of the hose (5). Tighten
the fitting to ensure the gasket properly seals the
connection.
D).
Place any unused nozzles and nozzle washer into the
small accessory pouch until ready to spray.
Summary of Contents for Volt XCMADD
