13.
Copyright ©WESSOL, LLC
STEP 2.
PREPARING TO SPRAY
A).
Fully charge the battery (6) before the first operation.
Indicator lights will flash as the battery is charging. In
a separate container, prepare the solution you want
to spray according to the manufacturer’s instructions.
Open the tank and carefully pour the solution through
the tank strainer. Securely tighten the tank lid.
B).
Determine the nozzle you want to use (see below). To
remove the current nozzle, use the nozzle wrench (9)
by fitting the 12mm hex socket over the nozzle and
rotate until removed.
11) 40-Micron nozzle ~ 4min Dwell Time
12) 80-Micron nozzle ~ 5min Dwell Time
13) 120-Micron nozzle~ 8min Dwell Time
C).
Turn pump on by flipping switch on side of unit.
I | Indicates Pump is On
O | Indicates Pump is Off
D).
To activate electrostatic, press red button. Once
illuminated, red light indicates the electrostatic feature
is on. To toggle on/off press once.
To turn on Turbo-Boost
™
Fan, flip the switch on the
side of the gun. Wait until you hear fan.
There are 3 spray distance capabilities.
E).
Place any unused nozzles and nozzle washer into the
small accessory pouch until ready to spray.
Summary of Contents for Volt XCMADD
