4
Safety feature
o
Dry coil protection (only applicable for temperature control mode)
o
Coil overheat protection
Support Ni200, Ti01/02, SS316L, NiFe30, NiFe70, Nichrome N60. Refer to coil
material table for detail.
Protection temperature can be change through “X-Taste Advance”.
o
Real-time battery temperature monitoring. Auto shutdown device if temperature
too high or too low.
o
Real-time on-board temperature monitoring. Auto shutdown device if temperature
too high.
o
Battery health condition checking feature. Able to give alert if battery not in good
condition.
o
Coil over voltage protection.
o
Coil over current protection.
o
Coil short/open circuit protection.
o
Weak battery protection.
o
Battery over charge protection.
o
Battery over load protection.
o
10 seconds maximum fire duration protection.
Support firmware upgrading through USB port.
Screen lock features.
Coil resistance measurement features.
Real-time display data during fire on
o
Battery voltage, capacity
o
Coil resistance (power mode)
o
Sensing coil temperature (temperature mode)
o
Coil voltage
Auto power off features, 6 minutes.
o
Can be modifying through “X-Taste Advance”.
5 individual preset configurations.
Continuous short press “Fire ON” button 3 times to power on devices.
Smart auto lock coil resistance.
Using TCR or temperature coefficient based on type of coil material for more precise
temperature control and coil overheats protection.
X-Taste Advance software allow user to modify setting and operation of the device.
