3
1.
Specification and features
Model: X250
Dimension: Height x Width x Length (102mmx63mmx27mm)
Weight: TBD
Body Material: Zinc Alloy
Atomizers Connector:
Stainless Steel 510 Connection, Nickel Plated Brass Contact
Display: 1.3 OLED
Easy replaceable 1350mAh 2 Cell LIPO
o
7.4V
o
Easy replaceable battery
o
Note Only support battery from authorize dealer of X-Taste
Atomizers
o
Output power range: 5W ~ 250W
o
Output current range: 0A ~ 45A
o
Maximum 40A continuous current. *2
o
Output voltage range: 0.5V ~ 15.5V (Buck-Boost DC-DC converter)
Power consumption (Without fire): 0.4W
Very low standby current: 39.5uA (Able to standby 3.9 years for fully charge battery)
Coil resistance
o
Measurement range 0.04Ohm ~ 10Ohm
o
Resolution: 1m Ohm (based on 0.1ohm measurement)
Power control mode
o
Recommended resistance range: 0.08Ohm~3Ohm
o
Coil over heat protection. Refer to coil material table for detail.
Temperature control mode
o
Recommended resistance range: 0.08Ohm~2Ohm
o
Repeatability: 1 degree Celsius / 1.8 Fahrenheit
o
Support Ni-200, Ti 01/02, SS316L, NiFe30, NiFe70. Refer to coil material table for
detail.
o
Temperature adjustment range can be change through “X-Taste Advance”.
o
Dry coil protection.
Power control / Temperature control mode
Efficiency: 98% for Kanthal A1, >94% for Ni-200 (200W)
*1
Battery Management
o
Support maximum up to 2A USB charging current.
o
Less than 2 hour for complete charging based on 2.0A USB current.
o
Support cell by cell monitoring
o
Support cell balancing: 99.5%
