Field name
explanation
Phone number
There are two types of matching conditions: one is
full matching, the other is prefix matching. In the Full
matching, you need input your desired phone
number in this blank, and then you need dial the
phone number to realize calling to what the phone
number is mapped. In the prefix matching, you need
input your desired prefix number and T; then dial the
prefix and a phone number to realize calling to what
your prefix number is mapped. The prefix number
supports at most 30 digits
Destination
Set Destination address. This is optional config item.
If you want to set peer to peer call, please input
destination IP address or domain name. If you want
to use this dial rule on SIP2 line, you need input
255.255.255.255 or 0.0.0.2 in it.SIP3 into 0.0.0.3
Port
Set the Signal port, the default is 5060 for SIP.
Alias
Set alias. This is optional config item. If you don’t set
Alias, it will show no alias.
Note: There are four types of aliases.
1) add: xxx, it means that you need dial xxx in front of phone number,
which will reduce dialing number length.
2) all: xxx, it means that xxx will replace some phone number.
3) del: It means that phone will delete the number with length appointed.
4) Rep: It means that phone will replace the number with length and
number appointed.
You can refer to the following examples of different alias application to
know more how to use different aliases and this dial rule.
Call Mode
Select different signal protocol, SIP
Suffix
Set suffix, this is optional config item. It will show no
suffix if you don’t set it.
Delete Length
Set delete length. This is optional config item. For
example: if the delete length is 3, the phone will
delete the first 3 digits then send out the rest digits.
You can refer to examples of different alias
application to know how to set delete length.
Examples of different alias application
Set by web
explanation
example
You need set phone
number, Destination, Alias
and Delete Length.
Phone number is XXXT;
Destination
is
255.255.255.255 (0.0.0.2)
and Alias is del.
This means any phone No.
that starts with your set
phone number will be sent
via SIP2 line after the first
If you dial
“93333”, the
SIP2 server will
receive “3333”
