5.3.5. Maintenance
5.3.5.1. Auto Provision
Auto Provision
Field name
explanation
Current Config
Version
Show the current config file’s version.
Server
Address
Set FTP/TFTP/HTTP server IP address for auto update.
The address can be IP address or Domain name with
subdirectory.
Username
Set FTP server Username. System will use anonymous
if username keep blank.
Password
Set FTP server Password.
Config File Name
Set configuration file’s name which need to update.
System will use MAC as config file name if config file
name keep blank. For example, 000102030405.
。
Config Encrypt
Key
Input the Encrypt Key, if the configuration file is
encrypted.
Protocol Type
Select the Protocol type FTP
、
TFTP or HTTP.
Update Interval
Time
Set update interval time, unit is hour.
Update Mode
Different update modes:
1. Disable: means no update
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
5.3.5.2. Syslog Config
Syslog is a protocol which is used to record the log messages with client/server
mechanism. Syslog server receives the messages from clients, and classifies them
based on priority and type. Then these messages will be written into log by some
rules which administrator can configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. You system can not
work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.