19
FUNCTIONS
SCAN
Automatically scan through each mode in sequence every 6 seconds. The display
loop is RPM - Speed
–
Time
–
Distance
–
Calorie - Pulse on the main screen.
TIME
Accumulates total time from 00:00 up to 99:59. The user may preset target time by
pressing SET & MODE button. Each increase is 1 minute.
RPM
Displays the Rotation per Minute (RPM). The RPM and SPEED will switch to
another
display in every 6 seconds after exercise starts.
SPEED
Displays current training speed. Maximum speed is 99.9 km/h or mile/h.
DISTANCE
Accumulates total distance from 0.00 up to 99.99 km or mile. The user may preset
target distance data by pressing SET & MODE button. Each increase setting is 0.5
km or mile.
CALORIES
Accumulates calories consumption during training from 0 to max. 999 calories.
The
user may also preset the target calorie before training by press SET & MODE
button. Each setting increase is 10 cal.
Note: This data is a rough guide for comparison of different exercise sessions
which cannot be used in medical treatment.
PULSE
The monitor will display the user's heart rate in beats per minute during training. You
may set the target heart rate by press the SET & MODE button.
CALENDAR
The monitor will display date, month, and year when the monitor is in sleep mode.
CLOCK
The monitor will display current clock time when the monitor is in sleep mode.
TEMPERATURE:
Displays current room temperature from 10
℃
to 60
℃
when the monitor is in
sleep mode.
OPERATION ORDER:
1. Power on
–
Installs 2 pieces of 1.5V UM-3 or AA batteries. The monitor start to segment test with a long beep
sound. (Whenever batteries are removed, all the functions values will be reset to zero or default
value.)
2. Set current data
–
Press the SET and MODE buttons to set up current clock time, year, month, and date. After the
first setting till batteries be replaced next time, those preset data will be updated automatically.
3. Select and preset target value
–
Get access to the setting function of Time, Distance, Calories and Target Pulse. When you are in
each setting mode. For instance the Time setting, when the time value is glitter, you can
press
the SET button to adjust the value. Press the MODE button for confirmation and skip to
next
setting. The setting of Distance & Calories is the same as Time setting.
4. After entering speed signal, each function of SPEED-RPMTIME-DISTANCE-CALORIES- PULSE
will skip to display in every 6 seconds.
5. You can also press the MODE button to select single function display on the main screen except
RPM & SPEED. The RPM & SPEED function will switch display in 6 seconds.
