15
5) Check if the brakes are properly adjusted. The brake
handles should stop short of touching the handgrip, when
fully engaged. The rear brake cable can be adjusted in
two places:
At the cable end bracket, just before the lever,
with 8 and 10 mm wrench adjustments, and
At the end of the lever, with a 10 mm nut fastener.
The front brake is adjusted
at the end of the cable, at
the saddle nut.
6) Install the cargo basket. Attach the cargo basket to the
four bolts on the back of the seat and secure it tightly.
7) Circuit Breaker. Using the ignition key, open the rear
storage compartment located under the seat. Locate the
circuit breaker and switch it from off to on
8) Your XB-420M has been in transit and storage. You
must charge the batteries before riding it. Charge the
battery by plugging the charger into the XB-420M’s
Charger Ports.
