Accelerating and Braking
Throttle Tips
1. Turn the key to the ‘ON’ position, and turn the Throttle gradually to
accelerate.
2.
To prevent losing control of the vehicle, please turn the Throttle slowly
until the speed increases.
3.
Do not turn the Throttle until you are in the position to drive.
4. To stop, release the throttle and apply the front and rear brake
simultaneously.
5. To move, release the brakes and turn the Throttle gradually.
6.
The Brushless motor makes a small electromagnetic noise when
turning the Throttle to start. This is normal.
7. Please, for your safety and security, take the key out when you are not
riding.
Braking Tips
1.
For safety, this vehicle has a circuit brake system. When the front and
rear brake is applied, the controller will
disable the circuit; release the
throttle back to the start position then accelerate again.
2.
Less frequent sudden braking will increase range entirely.
If running
under top speed, do not continually operate at full throttle.
Frequently releasing the throttle and running with inertia will help
to increase your range. This motor has good torque and the inertia
momentum is enough to run some distances without electric
power.
12
