Point Inspection before every use
Item
Action
Front Brake
Squeeze right hand brake and push the vehicle to
see whether it rolls easily. If it does, then the brake
must be tightened. Tighten the bolt until the vehicle
will no longer move with the brakes applied.
Rear Power
Disc Brake
Listen for any noticeable grinding or squealing from
the tires while the brake is applied. If so, contact
the supplier.
Brake Fluid
Check fluid gauge on the left handlebar to ensure
that the brake fluid is above the indicated level. If
not, top it off with a good brand of brake fluid.
Electric Switch Handle
Turn Throttle counter clockwise then release; the
Throttle should spring back to stop position. If not,
contact your supplier.
Tires
Check the tire pressure is 36 PSI
Controller/ Motor
Check the usage and condition
Battery
Check the power level by looking at the gauge or
with a voltage meter (26V-12V).
Signal
Check to make sure your lights are working.
Nuts and Bolts
Check to make sure that all nuts and bolts are
tightened and secured.
Important Notes
1. Regularly perform a routine maintenance check. Doing so will help
protect yourself and your vehicle.
2. If any parts are damaged, whether normal or abnormal, please check
with the supplier before riding.
4
