13
Figure 5
Figure 6
The circuit breaker switch (Figure 6)
can be located underneath the seat in
the seat barrel compartment (Figure 5).
While the operating current exceeds
the rated current, the circuit breaker
would cut the current, but with this circuit breaker switch you can
reconnect the current. If the scooter stops suddenly you, you
should check to see if this switch is turned off.
Figure 7
Figure 8
The different gear lever is used to cut off power to the
throttle. In the “down position” (Figure 7) the
different gear motor can be controlled by the throttle. In the “up position (Figure 8) the different
gear motor cannot be controlled by the throttle and will not allow you to increase speed.
**Note: If you want to change positions of the lever you must turn the power to power off and
then turn the power back on to change functions.
Figure 10
The seat adjustment lever (Figure 9) allows you to move
your seat forward or backwards. While sitting on the
seat, press the lever down and move forward or backwards
to find a suitable riding position.