Page8
Finish the power wheel installation by attaching
the corresponding wire clips on the inside of the
body as shown.
Installation of Rear Wheel
1. Locate the rear axle, remove the two
nut caps and set aside.
2. Insert the axle thru the rear wheel being
sure to insert the black spacers in the
correct orientation.
3. Insert the axle thru the rear wheel
brackets and tighten the two nut caps
securely.
Installation of Front Wheel/Fender/Forks
1. Slide the front fender onto the
handlebars
assembly
as
shown
securing it with one of the enclosed
screws.
2. Next attach the left and right fork by
snapping them around the handlebar
posts. Secure with enclosed screws.
3. Locate the front axle, remove the two
nut caps an set aside.
4. Insert the axle thru the front forks and
front wheel being sure to insert the
black spacers in the correct orientation.
