background image

- 13 -

WHAT DOES THIS WARRANTY NOT COVER?

This limited warranty during the Warranty Period does not cover any damage due 

to: (a) improper use; (b) failure to follow the product instructions or to perform any 

preventive maintenance; (c) modifications; (d) unauthorized repair; (e) normal 

wear and tear that comes with household use; or (f) external causes such as 

accidents, abuse, or other actions or events beyond our reasonable control. It 

also does not cover consumable parts.

WHAT IS THE PERIOD OF COVERAGE?

This limited warranty starts on the date of your purchase and lasts for 3 years 

(“The Warranty Period”), which shall be divided into two periods: (1) the first 

30 days from the date of your purchase (“Initial Warranty Period”); and (2) the 

remainder of the 3 year period after the Initial Warranty Period has expired (the 

“Remainder Warranty Period”). The Warranty Period is not extended if we repair 

or replace the product. We may change the availability of this limited warranty at 

our discretion, but any changes will not be retroactive.

WHAT ARE YOUR REMEDIES UNDER THIS WARRANTY?

With respect to any defective product during the Initial Warranty Period, we will, 

in our sole discretion either (a) replace such product (or the defective part) free of 

charge, or (b) refund the purchase price of such product.
With respect to any defective product during the Remaining Warranty Period, 

we will repair such product free of charge and provide a full-service inspection 

of your product. You will be responsible for all shipping and handling fees to and 

from our facility.

HOW DO YOU OBTAIN WARRANTY SERVICE?

To obtain warranty service, you must call 844-861-4762 or email us at Info@

XTronicUSA.com during the Warranty Period to open a service request. Proof of 

purchase will be required to open a service request.

LIMITATION OF LIABILITY

THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE 

REMEDIES AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS 

LIMITED WARRANTY. OUR LIABILITY SHALL UNDER NO CIRCUMSTANCES 

EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE 

PRODUCT, NOR SHALL WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR 

ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR 

LOSSES, WHETHER DIRECT OR INDIRECT.
SOME STATES HAVE DIFFERENT LIMITATIONS OF LIABILITY AND 

EXCLUSIONS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU.

Summary of Contents for 4020-PRO-X

















Reviews: