- 9 -
Safety Precautions
1. Never use the micro hot air pencil near any flammable substance,
material, or gas.
2. Never touch the metallic components of the micro hot air pencil
while they are in use. The items may be extremely hot and will
cause serious burns instantly. Allow the unit to properly cool to room
temperature before attempting to touch them.
3. Never point the micro hot air pencil towards any flammable material
or human skin. There is very hot air exiting the outlet that may
cause serious burns or damage.
4. Do not use pliers or any other tool to manipulate hot air nozzles.
5. Do not try to reform nozzle attachments into other shapes.
6. Ensure a minimum distance of 2mm while using micro hot air pencil.
7. Always keep the micro hot air pencil moving.
Maintenance
Unit
1. Keep the unit plugged into a GROUNDED outlet at all times during
operation.
2. Keep the unit and all components free from dirt, debris, and liquid at
all times.
3. Make sure the power cord is plugged in correctly and safely off the
floor to prevent accidents.
4. Keep all cords in the immediate workspace and avoid letting them
hang off the side of a table or bench top.
5. Wipe the unit down, when needed, with a dry, static-free cloth.
Install/Remove Hot Air Attachment
1. Turn the power off to the unit and unplug it from the power source.
2. Allow the hot air gun and attachment to reach room temperature
before proceeding.
3. Do not use excessive force when installing/removing hot air
attachments. Loosen the screw and nut from the attachment
by holding the nut with a pair of pliers and turning the screw
counterclockwise.
4. Slide the attachment off of the metallic shaft of the hot air gun.
5. Repeat in the reverse order for installation.
Do not overtighten the
screen and nut on the hot air gun.
