X-Tronic Platinum Edition 2000-XTS, Instruction & Tips

- 5 -

SWEEPING FUNCTION

Sweep Technology is featured in all of our X-Tronic Ultrasonic Cleaners. An 

ultrasonic cleaner with a Sweeping Function uses multiple ultrasonic frequencies 

in one tank no matter how many transducers are built into the unit. In ultrasonic 

cleaning, sweeping is defined as a purposeful deviation from the center 

frequency during operation as a function of time. The result of using this function 

is there will be no dead spots in the cleaning tank and will make for a 

much

superior

 cleaning result of your object.

Ultrasonic cleaners 

without

 the Sweeping Function use just one single frequency 

to create the cavitation effect in the unit and this means that there will be dead 

spots in the cavitation and thus the cleaning of that object will be inferior.

By using the Sweeping Function, every object you put in your tank to be cleaned 

will have perfect uniform cavitation cleaning that object with no dead spots.

Our recommendation is to use the Sweeping Function every time you 

ultrasonically clean any object because with Ultrasonic Sweep Cleaning we know 

you will be much more satisfied with the results.

DEGASSING FUNCTION

All X-Tronic Ultrasonic Cleaners also feature a Degassing Function.

A degassing process should be undertaken each time fresh cleaning solutions 

are prepared. You have the option of not degassing fresh ultrasonic cleaning 

solutions but the penalty is decreased cleaning efficiency and effectiveness.

The Degassing Function pulses the ultrasonic power on and off. During the on 

phase the bubbles form and coalesce, and during the off phase they rise to the 

surface and burst. This is why cleaners equipped with a degassing function are 

more efficient than those not so equipped.

So when you mix a fresh cleaning solution in your tank, we highly recommend 

that you turn on the Degassing Feature and run it for approximately 5 minutes.

PIEZOELECTRIC TRANSDUCERS

All X-Tronic Ultrasonic Cleaners are manufactured with Piezoelectric Transducers 

which have high efficiency, large amplitude, low heat, and stable output 

unaffected by variations in load.

The high mechanical quality of Piezoelectric transducers ensures that these 

sandwich-type ultrasonic transducers offer high electro-acoustical efficiency and 

low heat generation. The mechanical connection of the Piezoelectric elements 

assures a large amplitude output.