X-Tronic Platinum Edition 2000-XTS, Instruction & Tips

- 6 -

PROCEDURE FOR PREPARING YOUR ULTRASONIC CLEANER FOR 

CLEANING

1. Plug the unit into a grounded outlet.
2. Fill the tank with water up to (or a little over) the fill mark on the inside of the 

tank. Do not fill with water more than 1/2 inch from the top rim of the tank.

3. Turn On the Ultrasonic Cleaner Main On/Off Switch.
4. Select your cleaning temperature by turning the Temperature Dial to the 

appropriate temperature. Please note that 90% of the time you will be 

ultrasonic cleaning most objects between 70° Celsius and 80° Celsius.

5. 

Turn the Cleaning Time Set Knob to the Infinity Sign (Full On / ∞) at this 

time.

6. Wait for the water to heat up to the temperature you set. This will show in 

the LED Temperature Display.

7. When the LED Temperature Display shows the actual temperature you 

set it at, add the ultrasonic cleaning solution (of your choice) to the water.  

Please note that we do not sell an ultrasonic cleaning solution, but we have 

always had very good results using Alconox® Products which can be found 

many places on the web.

8. Turn on the Degassing Function for 5 minutes by pushing the Blue 

Degassing Function Key (#4 above).

9. After you have degassed the solution for 5 minutes, then turn the degassing 

function Off by pushing the Degassing Function Key. You are now ready to 

ultrasonically clean your object(s).