background image

- 2 -

SAFETY PRECAUTIONS

1.  When not in use always turn the power off and unplug the unit from 

the electrical outlet.

2.  Never use the soldering iron near any flammable substance, 

material, or gas.

3.  Never touch the metallic components of the soldering iron while 

they are in use. The items are extremely hot and will cause serious 

burns instantly. Allow the unit to properly cool to room temperature 

before attempting to touch them.

4.  Do not use the unit for any application other than soldering.
5.  Do not tap the soldering tip against the work surface to remove 

residual solder - this can damage the soldering tip and/or heating 

element.

6.  Do NOT modify the unit in any way.
7.  When replacing consumable parts, only use approved 

manufacturer parts.

8.  Do not get the unit wet or use when your hands are wet.
9.  The soldering process can produce smoke - ensure the area is 

well ventilated. 

UNIT PARTS

1

3

4

5

6

7

8

2

9

1.  Soldering Iron Holder 
2.  Solder Roll Holder
3.  Digital LED Temperature 

Readout

4.  Temperature Adjustment 

Buttons

5.  Power Switch
6.  Soldering Iron
7.  100% Silicone Work Mat
8.  Wet Sponge Tip Cleaner
9.  Brass Sponge Tip Cleaner

Summary of Contents for XTR-9040-PRO-X













Reviews: