2020-3-11 Version
6
Note:
When
using
a
card
with
previous
files
saved,
it
is
recommended
to
save
the
files
to
your
computer
first
and
format
the
card
before
use.
To
format
the
card,
press
Mode
several
times
to
reach
menu
and
select
“Format
SD”.
If
the
“Memory
Full”
warning
message
appears
on
the
LCD
screen,
the
SD
card
is
full.
Please
transfer
all
the
files
to
your
computer
and
delete
the
files
on
the
card.
Then
the
card
can
be
used
again.
Turn
ing
on your Binoculars
:
(1)
Long
press
the
Power
button
to
turn
on
the
binocular.
Once
the
power
is
on,
look
into
the
LCD
screen
inside
for
preview.
(2)
Adjust
the
focus
by
turning
the
focus
wheel
at
the
front
bottom.
See
below
arrow
for
“focus
wheel”
(3)
For
daytime
use,
make
sure
the
IR
is
off.
For
night
use,
turn
on
the
IR
by
pressing
the
IR
button.
Increase
the
brightness
by
pressing
the
button
repeatedly.
It
has
4
levels
of
brightness
(0ff->1->2->3->0ff
…
).
(4)
Long
press
the
Power
button
to
shut
down
the
binocular.
(5)
If
the
screen
brightness
needs
to
be
adjusted,
short
press
the
Power
button
or
you
can
go
to
the
“Menu
Settings”
to
adjust.
(6)
The
binocular
will
save
the
setting
from
last
use.
(7)
This
binocular
has
an
auto
shut
off
feature;
after
5
minutes
the
binocular
will
power
off
to
conserve
battery
power.
To
change
this
setting
,
go
to
the
“Menu
Settings”
to
turn
it
off,
or
change
it
to
10/15/30mins.
