6. Installation position by car type
3.
Bus
:
Attach the bracket on the front
window within 10cm from the vertical line,
which is typically placed on the center of
the front window and 10cm above the
wipers so as not for them to disturb the
field of vision of K11. Arrange the cables
neatly using the provided wire splice clips.
17
4. Truck
:
Attach the bracket on the center of
the front windshield about 10cm above the
wipers and arrange the cables neatly with
the provided wire splice clips so as not to
disturb the field of vision of the driver.
Caution!
For trucks and buses, do not forget to install a power stabilization cable (a 24V to 12V
adapter). K11 can be operable in the voltage range of DC 12V to 24V but it doesn’t necessarily mean
that the product can operates in all buses and trucks. Please ask advice from the store where you
bought your K11 for the use in a truck or a bus. Any damage or malfunction caused by power
problems of the product installed in a truck or bus shall not be the responsibility of the manufacturer.
Summary of Contents for K11
Page 42: ...MEMO 42...
Page 84: ...MEMO 42...
