Note for programming Macro’s:
It may be necessary to have “delays” included in the Macro sequence (e.g. to allow
your TV warm-up time). Delays can be achieved by using the Pause key followed
by the number of seconds delay required e.g. to enter a delay of 4 seconds, press
and release Pause followed by 4. Maximum delay is 9 seconds. It is not possible to
have a “0” digit entered after Pause i.e. there is no zero delay.
There is an automatic delay of 1 second between each IR transmission in the
sequence
To Delete a Macro :-
1. Press and hold the Setup button until the Visible LED remains on. Release Setup
button.
2. Press and release the Macro key you want to delete. Visible LED will blink off to
indicate the keypress acceptance.
3. Press and release the Setup key. The Visible LED will turn off and the Macro is
deleted.
12) Controlling your house with home automation modules from X10
The UR76E remote allows you to command all electric appliances you have in your
house. In addition to transmitting infrared signals, which control your TV, VCR, SAT,
CD, DVD and CBL, your remote is equiped with a radio transmitter sending X10
signals, which will enable you to control from a distance lamps and electric
appliances.
Here are some examples that you can do with your 8 in 1 remote using X10:
•
Switch on/off , dim lights while you watch TV.
•
Switch on the lights at night to frighten intruders when you detect something
suspicious
•
Switch on your electric blanket before the film ends to have it warm when you go
to sleep
For controlling your lamps or appliances, you will need additional X10 home
modules. The modules are simply plugged into a/c outlet with no additional wiring
required. Contact your retailer for additional information.
To switch on/ off an appliance plugged into an X10 module
: Press the X10
key (5), then press the unit code of the X10 module on the key pad (11) and then
press CHAN+ / - (6)
To dim/bright a light plugged into an X10 module
: press its unit code on the
key pad (11) and then press VOL+ / - (7)
To turn ON all the X10 Lamp modules:
Press the Power key (3)
To turn Off all the X10 modules (Lamp and appliance):
press the Mute key (8)
- 11 -