UR76 E REMOTE CONTROL
Contents
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Introduction
Put in the batteries
General point
Functions of the key
Programming for the TV, VCR, Satellite, CD, DVD and CBL
Manual code search « AUTOSEARCH »
Automatic code search
Identifying codes found
Learning commands
Clearing learned commands
Macro function
Controlling your house with X10 home automation modules
Changing the X10 House Code
Troubleshooting
1) Introduction
The UR76E is designed to control up to 8 devices (TV, VCR, DVD, Satellite, CD, CBL
and PC, plus X10 modules). The UR76E contains a library of codes which are pre-
programmed into the remote control. This library covers nearly all the audio video
products on the market today.
To make it easy for you to find the right code for your audio video equipment, we
advise to use the AUTOSEARCH feature.
2) Put in the batteries (always use NEW alkaline batteries LR03)
1. Open the cover on the back of the UR76E.
2. Insert 2 AAA batteries - LR03 alkaline, verify that they are placed correctly with
the + on the battery in the same position as marked inside the battery
compartment.
3) General Point
The RF transmission:
It is simultaneous to the IR signal. This allows you to
combine the commands of your TV , VCR ... and with the use of the Power Mid it
works through walls and floors.
The double function
: it allows you to control the volume and the « mute » button
of your TV even when you are in VCR, DVD, SAT or CD or SAT mode.
-4-
