X10 IconRemote IR32A, Owner'S Manual

19

18

Using The  Remote

Assuming you followed the steps on the previous pages and
have set up some devices and some favorites, you can now use
the remote. See the sections that follow to set up more devices
and/or favorites, and to set up other functions. (See page 37 to
learn how to set up more favorites.)

Using the Remote

Pressing either the 

HIS

 or 

HERS 

key 

once

at any time accesses the favorites that
you’ve set up. You can select any of your
favorites by pressing the button next to the
icon you want.

Pressing either the 

HIS

 or 

HERS

 key a

second time

 accesses the X10 Home

Automation modules that you’ve set up for

All Rooms

. Use the Side Keys or the

Navigation Buttons

 to select the icon you want to control.

X10 RF Devices

Selecting 

X10

 from the 

MODE

 key

screen displays the Pick Group screen.

• Press the side key for the room that has

the device that you want to control.
(For example, press the Side Key for

“Living Room.”) The screen shows the

device icons according to the way
“Living Room” was set up.

• Press the Side Key to send a command to the device. The

status of the device changes. You can see the status of the
device at the bottom of the screen; and the icon also changes

in appearance.

Extended Features

Any Side Key associated with an icon that has extended
features follow with additional screen(s) that can be used to
control the device. In addition, the 

Main Keys

 on the 

IR32A

remote can be used to control X10 devices in unique ways. This
allows you to control those features.

•

Set the House Code to ‘B’ and the Unit
Code to ‘3.’ (In this example, B3
matches the remote’s address for this
device.)

•

Plug a lamp into the Lamp Module.

•

Plug the Lamp Module into a conve-
nient AC outlet.

Setting Up X10 Devices, cont.

Setting up an LM465 Lamp Module (example)

The following is a basic example of how to set up an X10 Lamp
Module (sold separately). See X10’s Internet Home Page for a
complete catalogue of Home Automation Modules at 

http://

x10.com/homepage.htm.

Lamp Module

The Lamp Module may be used to control any incandescent
lamp rated up to 300W. It is not suitable for other types of
lamps such as fluorescent, energy saving lamps, or lamps that
include a dimmer control.

Caution:

 Do not connect an appliance such as a coffee pot or

heater to the Lamp Module. It may damage the module and the
appliance and could cause a fire hazard.

X10 Macros