X10 IconRemote IR32A Owner'S Manual Download | Manualshive

Page: 12 / 29

background image

23

22

QuickPower

QuickPower is a way of quickly turning

all your devices on or off from one easy

to use screen.

•

Press the

HOME

key to go to the Home

screen.

•

Then press the Side Key next to

QuickPower. Only Devices you’ve
previously set up are displayed. The

others are grayed out.

•

Press any key that isn’t grayed out to
send the “Power” command for that

device.

QuickPower for X10 Devices

Mode Key

Press the

MODE

key, then select a device

type to change the mode that the remote is

in. E.g., if the remote is in Cable mode

then the hard keys such as Channel Up/

Down, Volume Up/Down, numbers, etc.,
operate your cable box.

Also, when you select a mode, any extra
keys for that mode and any keys you’ve

learned for that mode are displayed. The

current mode that the remote is in is shown by an icon in the

lower-left portion of the screen. (The remote screen shown
above is in TV mode.)

Press the

FAVORITE

key to select your

favorites group. Then press the Side
Key next to the logo to change your
device to that channel. Selecting a
favorite group that has not yet been set
up, takes you to the setup Wizard.

Important:

Make sure you point the

remote at your device until the channel
changes. Pressing a Favorite key might
send the commands for say channel 162,
but if you don’t point the remote at your device until all three
digits are sent you might just get channel 16, or even channel 1.

Watch the flickering halo at the bottom left of the screen, it
flickers for each digit sent. It also shows what device is being
controlled.

Press the

HOME

key at any time to access the screen to do

setups, or access other features.

Before you continue, press Side Key K5 next to the Help icon
and follow the prompts to get an idea of how to use the remote.
Only Devices you’ve previously set up are displayed. The
others are grayed out.

Favorite Key

X10 Macros

• Select “

Pick Module.

” The Pick Room screen appears.

• Select the room that has the module you want to control.
• Select the module using the Side Key. Try a simple “Off”

command for now, but understand that you can string many
commands from different modules and different rooms
together in conjunction with delays as well.

• Select

Save

and then

Done

.

• Select

Home

/

Sleep

/

X10

.

• Press the Side Key to toggle when the command(s) will be

sent for 15 minutes to up to an hour and a half away from the
current time. Press

OK

to exit.

.

Sleep Macro Steps, cont.

• Set up an X10 device using the Wizard

or Add-Edit mode, for example a light in

your Living Room with an LM465
module.

• Select

Home

/

Setup

/

X10

/

More

/

QuickPower Macro.

• Select

Pick Module

, and select the command (s) you want to

send. Try a simple “Off” command for now,

but understand that you can string many commands from

different modules and different rooms together in conjunc-

tion with delays as well.

• Select

Save

and then

Done

.

• Select

Home

/

QuickPower

.

• Press the Side Key next to the X10 icon to trigger the Quick

Power Macro.

«
...
10
11
12
13
14
...
»

Summary of Contents for IconRemote IR32A






























Reviews:

No comments

Related manuals for IconRemote IR32A

Brand: RCA Pages: 12

Brand: Universal Pages: 18

ROC 56 - DESSIN

Brand: THOMSON Pages: 80

ROC 26 - DESSIN

Brand: THOMSON Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands