X10 IconRemote IR32A, Owner'S Manual

33

32

A Macro could include the Power key for
your TV, followed by the Power key for
your Cable box, followed (after a 2
second delay), by digit 4 from your cable
remote. Then, when you later activate this
Macro, it will turn on your TV, turn on
your cable box, wait 2 seconds, and then
set the cable box to channel 4.
At the Home screen press the Side Key
next to Learn.

Then press any Side Key K1-K5 to the
left to learn a Macro that you’ll save to a
Side Key (and later rename it if desired).

Learning Macros (Side Keys)

Select the device you want to learn keys
for. In this example we only have a TV,
Cable Box and Satellite Receiver set up,
so the rest are grayed out, but you can
still select any of the devices to learn
commands for. E.g., in this case we
selected DVR.

Then select the Side Key that you want to
store the Macro under, for example, L3.

Learning Side Keys, cont.

E.g., in this example we pressed the 3
key on the remote to enter the letter D.
Then we pressed the 8 key repeatedly
until the letter V was displayed. Then we
waited for a second and pressed 3 to
select D. Then we pressed the 0 (zero)
key twice until we selected a space. We
continued this process until we had
“DVD Zoom” displayed.

Note: “Triple tap” name entry works in a similar fashion to text
entry on a cell phone. Tap each numeric key to cycle through
ALL caps, numbers, and lower case letters. E.g., repeatedly
pressing the number 2 key cycles through A, B, C, 2, a, b, c.
Pressing the 9 key cycles through W, X, Y, Z, 9, w, x, y, z.
A “space” can be selected with the 0 (zero) key. The number 1
key selects 1 . @ ? ! - & : and back to 1. And you can
backspace an entry with the key to the left of the 0 (zero) key.
Press OK (or the Enter “E” key) to confirm your new name.

Press OK to save the new label for the
key we just learned.

The next time you set the remote to the
mode that you learned this key under,
you’ll see a screen where you can
select this and any other functions
you’ve learned under that mode.

Pressing the 

MODE 

key and then selecting a device type

shows the “extra” keys and learned keys for that mode. Note,
you can learn keys from any kind of remote under any mode.
You could for example learn the power keys for your TV, and
your audio system and extra keys for your DVD player under
the DVD mode. Then, when you press the MODE key and
select DVD, you’ll be able to turn on your TV, turn on your
audio system, and control your DVD player, all from the Side
Keys on this one screen.

X10 Macros