43
42
Advanced Settings
Press these keys using the following
sequence:
HOME, Setup
,
More
, and
Advanced
.
The screen to the right lets you change the
backlight delay; enter codes for devices
directly from the printed code list that
came with the remote; set up
punchthrough for various devices; and
limit the channels that young children can
access.
Options
Select Options, then press a Side Key to
the left or the right of the option to adjust
the setting. Then press OK.
Backlight adjusts how long it takes before
Device Codes
Select Device Codes, and then select a
device. Devices that have not yet been set
up are grayed out. You can select them here
and set them up by entering the device code
from the printed code list. Or, you can
change the code for a device that had
already been set up by simply entering the
new code.
This screen also lets you view the codes for any device that
has been set up. In the above example you can see the codes
that are set for TV, Cable, and SAT. We’ve selected CD and can
then enter its 4-digit code from the code list, using the number
keys on the remote. The above also shows that we’ve learned
codes under the AUX1 key in DVD mode.
the screen goes black (approx 2 to 120
seconds) if you don’t press any keys.
Key Transmit Time changes the delay between digits when
sending favorites, e.g., 1–6–2. This can be used in situations
where the channels are not accepted by the set-top box.
Setting up more, cont.
Clearing Settings in the Remote
This feature lets you clear (erase) various
things you’ve set up in the remote.
Press these keys using the following
sequence:
HOME, Setup
,
More
, and
Advanced
. Then at the screen to the right
select
Clear Settings
.
Pressing the Side Key next to Devices lets
you clear the settings, i.e., codes for
various Devices (TV, VCR, etc.). After
selecting Devices, you select the device
you want to clear. Only devices that you
have set up are shown. All other devices
that have not been set up are grayed out.
Pressing the Side Key next to Favorites lets you select a group,
e.g., His, Hers, etc., and then clear ALL the favorites you had
set up in that group of favorites. Only groups that you have set
up favorites in are shown. All other groups are grayed out.
Pressing the Side Key next to Learned lets you select a device
(TV, VCR, etc.) that you had previously learned commands
and/or Macros under and clear everything that was learned.
Only devices that you have learned commands and/or Macros
under are shown. All other devices are grayed out.
Pressing the Side Key next to Punchthrough lets you clear any
Punchthrough commands you had set up for a device. Only
devices that you have set up Punchthrough for are shown. All
other devices are grayed out.
Pressing the Side Key next to Master Clear lets you clear
EVERYTHING in the remote. Be careful when selecting this.
Note however that ALL the sections above display a warning
screen allowing you to change your mind before actually
clearing anything.
Summary of Contents for IconRemote IR32A
Page 1: ...Model IR32A IconRemote Owner s Manual ...
Page 28: ...55 54 Notes Notes ...
