X10 IconRemote IR32A, Owner'S Manual

13

12

Setting Up Your Favorites, cont.

If you want to add a label to the logo, press the Side Key next
to Label. This is optional so if you don’t want to add a label to
the logo you can just select Save to save the setting for this
favorite. If you save this favorite, Set Favorite 2 of 10 is now
shown at the bottom of the screen to indicate that you can add
another favorite channel. Again, just press a channel number
key on the remote, choose a logo and change the Device Type
(if you want to). Add a few more favorites (up to 10). You can
add more later, or delete or edit them later, or even reorder
their positions. Select Done when you’re finished setting up
favorites.
If you select Label, you see the screen to
the right with a small label on top of the
logo. Initially the label will be the channel
number for that logo. If you Save this, the
logo will have a small label representing
the channel number for that logo in it’s
bottom right hand corner, see screen (5).

(5)

But you can type in a new label if you
want one. You enter the new name for the
key using the numeric keys on the remote
in a similar fashion to typing in text on a
cell phone.

In this example, press the 5 key twice to
enter the letter K. Then, wait a second,
and then press the 4 key repeatedly until
the letter I is displayed. Then, wait a
second and press 6 to select N. Then,
wait a second and press the 4 key to
select G.

Once you’ve gone through the Wizard
and set up at least a TV, and set up more
devices, or skipped the rest of them, you
arrive at screen (1) to the right.

Setting Up Your Favorites

(1)

(2)

(3)

(4)

Press any digit key, say digit 4, to enter a
channel number. This takes you to screen
(2). You can enter more digits if desired.
The channel number can include a dash
(-) for digital channels, e.g., 2-3, or can
include ENTER, or OK, if your device
requires it to change channels, e.g.,
472Ok, or 550Ent.

Press the Side Key next to Pick Logo on
screen (2). You are shown a screen (3)
of popular channel logos. You can select
Next (Side Key 10) or Back (Side Key
5) to see more logos. In this example we
pressed the NBC logo (Side Key 4).
Screen (4) now shows that we’ve chosen
channel 4 and the NBC logo. Note, you
could also select the top left position
which would display “4” as the favorite
rather than a logo.

The Default device in this case was Sat,
but you can select Pick Device to
change it. In this case we changed it to
Cable. 

Make sure you select the

device that you want each favorite to
control, e.g., TV, Cable, or Sat.