X10 IconRemote IR34A, Owner'S Manual

18

19

  Using The Remote

Assuming you followed the steps on the previous pages and 
have set up some devices and some favorites, you can now use 
the remote. See the sections that follow to set up more devices 
and/or favorites, and to set up other functions. (See page 37 to 
learn how to set up more favorites).

Using the Remote

Pressing either the 

HIS

 or 

HERS 

key 

once

 at any time accesses the favorites that 

you’ve set up. You can select any of your 
favorites by pressing the button next to the 
icon you want.

Pressing either the 

HIS

 or 

HERS

 key 

a 

second time

 accesses the X10 Home 

Automation modules that you’ve set up 
for 

All Rooms

. Use the Side Keys or the 

Navigation Buttons

 to select the icon you want to control.

X10 RF Devices

Selecting 

X10

 from the 

MODE

 key 

screen displays the Pick Group screen.

•  Press the side key for the room that 

has the device that you want to control. 
(For example, press the Side Key for 
“Living Room.”) The screen shows 
the device icons according to the way 
“Living Room” was set up.

•  Press the Side Key to send a command to the device. The 

status of the device changes. You can see the status of the 
device at the bottom of the screen; and the icon also changes 
in appearance.

Extended Features

Any Side Key associated with an icon that has extended 
features follow with additional screen(s) that can be used to 
control the device. In addition, the 

Main Keys

 on the 

IR34A

remote can be used to control X10 devices in unique ways. 
This allows you to control those features.

• 

Set the House Code to ‘B’ and the Unit 
Code to ‘3.’ (In this example, B3 matches 
the remote’s address for this device.) 

• 

Plug a lamp into the Lamp Module.

• 

Plug the Lamp Module into a convenient 
AC outlet.

  Setting Up X10 Devices, cont.

Setting up an LM465 Lamp Module (example)

The following is a basic example of how to set up an X10 
Lamp Module (sold separately). See X10’s Internet Home Page 
for a complete catalogue of Home Automation Modules at 

http://x10.com/homepage.htm.

Lamp Module

The Lamp Module may be used to control any incandescent 
lamp rated up to 300W. It is not suitable for other types of lamps 
such as fl uorescent, energy saving lamps, or lamps that include 
a dimmer control.

Caution: Do not connect an appliance such as a coffee pot or 
heater to the Lamp Module. It may damage the module and the 
appliance and could cause a fi re hazard.