X10 IconRemote IR34A, Owner'S Manual

12

13

  Setting Up Your Favorites, cont.

Once you’ve gone through the Wizard 
and set up at least a TV, and set up more 
devices, or skipped the rest of them, you 
arrive at screen (1) to the right. 

Press any digit key, say digit 4, to enter a 
channel number. This takes you to screen 
(2). You can enter more digits if desired. 
The channel number can include a dash 
(-) for digital channels, e.g., 2-3, or can 
include ENTER, or OK, if your device 
requires it to change channels, e.g., 
472Ok, or 550Ent.

(5)

Press the Side Key next to Pick Logo on 
screen (2). You are shown a screen (3) 
of popular channel logos. You can select 
Next (Side Key 10) or Back (Side Key 
5) to see more logos. In this example 
we pressed the NBC logo (Side Key 4). 
Screen (4) now shows that we’ve chosen 
channel 4 and the NBC logo. Note, you 
could also select the top left position 
which would display “4” as the favorite 
rather than a logo.

The Default device in this case was 
Sat, but you can select Pick Device to 
change it. In this case we changed it to 
Cable. 

Make sure you select the device 

that you want each favorite to control, 
e.g., TV, Cable, or Sat.

If you want to add a label to the logo, press the Side Key next 
to Label. This is optional so if you don’t want to add a label 
to the logo you can just select Save to save the setting for this 
favorite. If you save this favorite, Set Favorite 2 of 10 is now 
shown at the bottom of the screen to indicate that you can add 
another favorite channel. Again, just press a channel number 
key on the remote, choose a logo and change the Device Type 
(if you want to). Add a few more favorites (up to 10). You can 
add more later, or delete or edit them later, or even reorder 
their positions. Select Done when you’re fi nished setting up 
favorites.

  Setting Up Your Favorites

(1)

(2)

(3)

(4)

If you select Label, you see the screen to 
the right with a small label on top of the 
logo. Initially the label will be the channel 
number for that logo. If you Save this, the 
logo will have a small label representing 
the channel number for that logo in it’s 
bottom right hand corner, see screen (5).

But you can type in a new label if you 
want one. You enter the new name for 
the key using the numeric keys on the 
remote in a similar fashion to typing in 
text on a cell phone. 

In this example, press the 5 key twice to 
enter the letter K. Then, wait a second, 
and then press the 4 key repeatedly until 
the letter I is displayed. Then, wait a 
second and press 6 to select N. Then, 
wait a second and press the 4 key to 
select G.