Infra-Red Mini-Controller IR7243W
4
To Turn All Lights On:
1. Aim the remote at the front plate of the Mini-Controller.
2. Press the mode key dedicated to Home Automation on your remote control.
3. Press the Power key of your remote control.
To Turn All Lights and Appliances Off:
1.Aim the remote at the front plate of the Mini-Controller.
2.Press the mode key dedicated to Home Automation on your remote control.
3.Press the Mute key of your remote control.
To use the Mini Controller's Command Center's control panel:
1. Press and release the on or off side of one of the four number keys
corresponding to the Unit Code set on the Module(s) to be controlled.
2. To change the light intensity : press on DIM/BRIGTH button (note : this
feature works if your selected lamp is plugged into a "lamp" module)
3. To switch on all the lights : press "ALL LIGHTS ON" button
4. To switch off all the lights and appliances : press "ALL UNITS OFF"
The Selector Switch determines which group of four Unit Codes will be
affected (1-4 or 5-8).
Safety warning:
Keep in mind that your Infra-Red Mini-Controller will always turn lamps
and appliances on or off when you use your Remote Control or press the
Mini-Controller buttons. That's obvious - but there can be some
unexpected consequences if not used with care. For example, an empty
coffee pot can be remotely turned on. If that should happen, your coffee
pot may be damaged from overheating. If an electric heater is turned on
by remote control while clothing is draped over it, a fire could result. Do
not use the system for the control of high power heating appliances such
as portable heaters.
Control with your Mini-Controller
