X10 MK10A, Owner'S Manual

33

32

C

HANGING

THE

 M

ASTER

 C

ODE

FOR

THE

 R

EMOTE

You can use up to 16 remotes within 100 ft. of each other without
interfering with each other by setting each remote to a different Master
Code. To do this, press and release PC. Then press and hold Setup until the
indicator starts to blink. Release Setup (the indicator blinks a number
corresponding to its Master Code (1-16) and then stays on). While the
indicator is on, enter a new number for this remote (1-16) and then press
setup. The indicator blinks back the new setting and then stays off. Repeat
this process for each remote, setting a unique number (1-16) for each
remote.

1.

Press and release the
PC button.

3.

While the indicator is
on, enter a new number
for this remote (1-16)
and then press Setup.
The indicator blinks
back the new setting
and then stays off.

2.

Press and hold Setup
until the indicator
starts to blink. Release
Setup (the indicator
blinks a number
corresponding to its
Master Code (1-16)
and then stays on).

C

HANGING

THE

 H

OUSE

 C

ODE

FOR

THE

 R

EMOTE

The 

Lola 

Remote comes set to House Code A by default. To change the

House Code on the remote follow steps 1 through 4 below:

1.

Press and release the
X10 button (indicator
flashes).

2.

Press and hold Setup
until the indicator
lights steadily.
Release the Setup
button.

3.

Use the number
buttons to enter the
number equivalent to
the chosen
Housecode (1=A,
2=B....16=P). Press 1
then 6 for 16, etc.

4.

Press the Mute
button to confirm the
Housecode. The
indicator blinks then
goes off.